Distributed fiber optic sensing system for vibration monitoring of 3D printed bridges
Author:
Affiliation:

1. School of Electronic Information Engineering,Hebei University of Technology, Tianjin 300401, China;3. School of Civil Engineering and Transportation,Hebei University of Technology, Tianjin 300401, China;4. Tianjin Jinhang Institute of Technical Physics, Tianjin 300308, China

  • Article
  • | |
  • Metrics
  • |
  • Reference [20]
  • |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    The fiber optic sensing technology provides data support in structural health monitoring of the macro facilities, including design, construction, and maintenance of bridges, tunnels, ports and other infrastructures. In this paper, a distributed vibration sensing system is proved to be responsive to a single touch over a 1.8-m-long equivalent fiber segment, covering a vibration frequency from 5 Hz to 25 kHz. The sensing fiber was arranged as an S type layout on the bridge to recognize the standing state, windblown disturbance, and walking vibration. Moreover, the knocking and climbing events are recognized fiber laying spinning lines and hanging on the fences, respectively. The demonstration shows an accurate positioning and sensitive vibration monitoring applied on the automated three-dimensional (3D) printed bridge, which is applicable to all kinds of 3D printed facilities as intelligent sensory neuro-networks.

    Reference
    [1] BUSWELL R A, DA SILVA W R L, BOS F P, et al. A process classification framework for defining and describing digital fabrication with concrete[J]. Cement and concrete research, 2020, 134:106068.
    [2] BUCHLI J, GIFTTHALER M, KUMAR N, et al. Digital in situ fabrication-challenges and opportunities for robotic in situ fabrication in architecture, construction, and beyond[J]. Cement and concrete research, 2018, 112:66-75.
    [3] BAI G, WANG L, MA G, et al. 3D printing eco-friendly concrete containing under-utilized and waste solids as aggregates[J]. Cement and concrete composites, 2021, 120:104037.
    [4] DE SCHUTTER G, LESAGE K, MECHTCHERINE V, et al. Vision of 3D printing with concrete-technical, economic and environmental potentials[J]. Cement and concrete research, 2018, 112:25-36.
    [5] KONTOVOURKIS O, TRYFONOS G. Robotic 3D clay printing of prefabricated non-conventional wall components based on a parametric-integrated design[J]. Automation in construction, 2020, 110:103005.
    [6] FURET B, POULLAIN P, GARNIER S. 3D printing for construction based on a complex wall of polymer-foam and concrete[J]. Additive manufacturing, 2019, 28:58-64.
    [7] WANG L, MA G, LIU T, et al. Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nails[J]. Cement and concrete research, 2021, 148:106535.
    [8] HUBBARD P G, XU J, ZHANG S, et al. Dynamic structural health monitoring of a model wind turbine tower using distributed acoustic sensing (DAS)[J]. Journal of civil structural health monitoring, 2021, 11(3):833-849.
    [9] ZHAO H, DING Y, LI A, et al. State-monitoring for abnormal vibration of bridge cables focusing on non-stationary responses:from knowledge in phenomena to digital indicators[J]. Measurement, 2022, 205:112148.
    [10] WANG Y, YUAN H, LIU X, et al. A comprehensive study of optical fiber acoustic sensing[J]. IEEE access, 2019, 7:85821-85837.
    [11] TABJULA J, SHARMA J. Feature extraction techniques for noisy distributed acoustic sensor data acquired in a wellbore[J]. Applied optics, 2023, 62(16):E51-E61.
    [12] SHANG Y, YANG Y, WANG C, et al. Optical fiber distributed acoustic sensing based on the self-interference of Rayleigh backscattering[J]. Measurement, 2016, 79:222-227.
    [13] NI J, WANG C, SHANG Y, et al. Distributed fiber-optic acoustic sensing for petroleum geology exploration[J]. Journal of physics:conference series, 2018, 1065:252029.
    [14] WANG Y, WANG X J, LI X L. OTDR-based optical fiber bending and tensile loss analysis[J]. Optoelectronics letters, 2023, 19(3):164-169.
    [15] PENG F, WU H, JIA X H, et al. Ultra-long high-sensitivity Φ-OTDR for high spatial resolution intrusion detection of pipelines[J]. Optics express, 2014, 22(11):13804-13810.
    [16] FERNáNDEZ-RUIZ M R, SOTO M A, WILLIAMS E F, et al. Distributed acoustic sensing for seismic activity monitoring[J]. APL photon, 2020, 5:030901.
    [17] HUANG M F, JI P, WANG T, et al. First field trial of distributed fiber optical sensing and high-speed communication over an operational telecom network[J]. Journal of lightwave technology, 2020, 38:75-81.
    [18] WANG Z, ZHANG L, WANG S, et al. Coherent Φ-OTDR based on I/Q demodulation and homodyne detection[J]. Optics express, 2016, 24(2):853-858.
    [19] ZHANG P, VENKETESWARAN A, WRIGHT R, et al. Feature extraction for pipeline defects inspection based upon distributed acoustic fiber optic sensing data[J]. Fiber optic sensors and applications XVIII, 2022, 12105:14-29.
    [20] ZHOU R, ZHAO S, LUO M, et al. MFCC based real-time speech reproduction and recognition using distributed acoustic sensing technology[J]. Optoelectronics letters, 2024, 20(4):222-227.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

ZHAO Shuai, ZHOU Ran, LUO Mingming, LIU Jianfei, LIU Xiongfei, ZHOU Tao. Distributed fiber optic sensing system for vibration monitoring of 3D printed bridges[J]. Optoelectronics Letters,2025,(1):28-34

Copy
Share
Article Metrics
  • Abstract:16
  • PDF: 0
  • HTML: 0
  • Cited by: 0
History
  • Received:January 24,2024
  • Revised:August 08,2024
  • Online: December 13,2024
Article QR Code