Archive > Volume 17 Issue 5 > 2021,17(5):271-275. DOI:https://doi.org/10.1007/s11801-021-0175-6 CSTR:[cstr] Prev Next
Intermodal interference based refractive index sensor employing elliptical core photonic crystal fiber
- Article
- Figures
- Metrics
- Preview PDF
- Reference
- Related
- Cited by
- Materials
Abstract:
A refractive index (RI) sensor based on elliptical core photonic crystal fiber (EC-PCF) has been proposed. The asymmetric elliptical core introduces the polarization-dependent characteristics of the fiber core modes. The performances of intermodal interference between the intrinsic polarization fiber core modes are investigated by contrast in two interferometers based on the Mach-Zehnder (M-Z) and Sagnac interference model. In addition, the RI sensing characteristics of the two interferometers are studied by successively filling the three layers air holes closest to the elliptical core in the cladding. The results show that the M-Z interference between LP01 and LP11 mode in the same polarized direction is featured with the incremental RI sensing sensitivity as the decreasing interference length, and the infilled scope around the elliptical core has a weak correlation with the RI sensing sensitivity. Due to the high birefringence of LP11 mode, the Sagnac interferometer has better RI sensing performance, the maximum RI sensing sensitivity of 12 000 nm/RIU is achieved under the innermost one layer air holes infilled with RI matching liquid of RI=1.39 at the pre-setting EC-PCF length of 12 cm, which is two orders of magnitude higher than the M-Z interferometer with the same fiber length. The series of theoretical optimized analysis would provide guidance for the applications in the field of biochemical sensing.
Keywords:
Project Supported:
Clc Number:
