Adjustment of residual stress and intermediate layer to BDD/porous Ti composite membrane
CSTR:
Author:
  • Article
  • | |
  • Metrics
  • | |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    Diamond films are deposited on porous Ti substrates by hot filament chemical vapor deposition (HFCVD) method. For adjusting the residual stress of substrate and the titanium carbide (TiC) intermediate layer, the substrates are under annealing process firstly, then are put into alkaline solution with electricity oxidation, and finally composite membranes are obtained by HFCVD, which are characterized by X-ray diffraction (XRD), metalloscope and scanning electron microscope (SEM). Results show that the composite membranes deposited on unannealed substrates are cracked obviously in both sides and broken off easily. After annealing process, the membranes are no longer cracked easily, because the tensile stress distributed in substrates is significantly relieved. After passivation process, TiC generated between diamond film and substrate is less than that without passivation process.

    Reference
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

Cheng-lu Tian, Xiao-wei Li, Ming Chang. Adjustment of residual stress and intermediate layer to BDD/porous Ti composite membrane[J]. Optoelectronics Letters,2013,9(3):189-193

Copy
Share
Article Metrics
  • Abstract:3999
  • PDF: 84
  • HTML: 0
  • Cited by: 0
History
Article QR Code